Series 218 - 14,500 PSI (1000 bar)

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.


Please fill in form below. * = Required
  
   
 
 
 
 
   

High-pressure Hydraulic Products

Couplings & Nipples

Series 218 - 14,500 PSI (1000 bar)

The Series 218 is a CEJN original that, despite very small outside dimensions, gives an extremely high flow. Both the patented sealing design and non-drip connection and disconnection are standard on CEJN’s high pressure range. The coupling also has a safety ring for the locking sleeve to prevent accidental disconnection. Plastic dust caps are standard on both coupling and nipple. The series is an all round coupling that works well in most applications, although it is mainly recommended where large flow rates are required.

Technical data
Nominal flow diameter: 11/64Inch (4.5 mm)
Flow capacity: 4.0 GPM (15.0 l/min)
Max. working pressure: 14500 PSI (1000 bar)
Min. burst pressure: 40610 PSI (2800 bar)
Temperature range: -22°F — +212°F (-30°C — +100°C)
Material coupling: Hardened, zinc chromate plated steel
Material nipple: Hardened, zinc chromate plated steel
Material seal: Nitrile (NBR) other sealing material on request
Comment: Avoid loading the nipple while disconnected. Dynamic load on nipple while disconnected may lead to seal damage.

Flow capacity is measured at 50 PSI (3.62 GPM) pressure drop.

Oil Flow

Pressure drop PSI

Flow, GPM
Couplings Part No. Remark Connection Length Diameter Hexagon Rec. torque Rec. seal. method
Female thread 102181234-G 3/8"73.434.63070-80T3*
 102181434-3/8" NPT73.434.63070-80-


Nipples Part No. Remark Connection Length Diameter Hexagon Rec. torque Rec. seal. method
Female thread 102186204-G 3/8"50.527.72470-80T3*
 102186404-3/8" NPT4927.72440-50-


*CMS= Cejn metal seal (120° cone), T1= rubber metal seal (19 950 0061), T2= rubber metal seal (19 950 0062), T3= rubber metal seal (19 950 0063), T4= high strength rubber metal seal (19 950 0083), W= cupper washer (09 950 4600).
Thread connections are listed according to ISO Standards. All measurements are in mm. Check with an authorized CEJN distributor for availability and prices.